Suzhou Forestry Technologies Co., Ltd.
Be your better option!
Add to Cart
28 Tons Per Hour Particle’s drum dryer for Paticle Board Production Line
7~35 Tons Per Hour Particle’s drum dryer for Paticle Board Production Line
Description
Wet material is fed via a rotary valve and a specially designed infeed chute into the rotating drum. There, the heat is transferred mainly through convection from the drying gases to the material for water evaporation. At the end of the drum, the material is pneumatically transported to cyclones where the material is separated from the drying gases. One portion of the drying gases is recirculated
to the mixing chamber for energy recovery and reduction of dryer exhaust volume.
Fully integrated control of dryer and energy plant
Fully welded drum shell with alternating sections of cruciform internals and lifting blades
Gear box with frequency-controlled main motor and backup motor for emergency case
Minimal air leakage due to proven seal technology
Dryer exhaust gas recovery
Fully integrated dryer deluge system
Two types of drum dryer system
Main characteristics of drum dryer
Main technical data
| BGXT7 | BGXT10 | BGXT13 | BGXT15 | BGXT18 | BGXT28 | BGXT35 | |
| Capcity of flakes / t/h | 7 | 11 | 13 | 15 | 18 | 28 | 35 |
| Diameter of drum / m | 3.2 | 3.6 | 3.7 | 4 | 4.3 | 4.6 | 5 |
| Length of drum / m | 15 | 18 | 25 | 26 | 28 | 28 | 26 |
| Thermal demand / MW | ~7 | ~10 | ~12 | ~16 | ~19 | ~27 | ~34 |
| Meet the demand of particle board capacity / cbm per day | ~200 | ~300 | ~400 | ~500 | ~700 | ~1000 | ~1250 |